- Induction motors are easily re-windable using multi layer PVC insulated wire for better reliability.
- Motor filled with water gives better cooling to winding as well as bush.
- Self-aligned Teflon OR carbon Stainless steel thrust bearing which withstands high axial thrust load in water lubrication.
- Electrically designed to lower power consumption and operating cost.
- Non-magnetic, corrosion-resistant high-grade stainless steel stator body.
- Water-filled motor is available in capacitor start and run design.
- Gun Metal bush is made with additional centrifugal molding process and 2 % Nickel is added.
- Superior designed Noryl impellers and diffusers give higher hydraulic performance and greater efficiency and provide higher resistance against wear and tear from sand and other impurities.
- Stainless steel strainer prevents particles over a certain size from entering the pump.
- Pumps are available with non-return valve to reduce the backpressure of water when it is switched off.
- Impeller and Bowl are accurately machined by CNC machine to ensure high dimension accuracy.
- Rubber bush and SS hard chrome sleeve increase wear-resistance against sand.
- Lightweight, compact and robust construction design.
- Sprinkler and drip irrigation.
- Urban and Rular resident water Supply and Industries.
- Fire fighting system
Material of Construction
|Stator Shell||Stainless steel|
|Thrust Bearing||Taflon/Carbon with stainless steel segments|
|Bearings Bush||Leaded Tin Bronze/ Carbon|
|Breather Diaphragm||Nitrile Rubber|
|Pump shaft||Stainless steel|
|Discharge casing||Cast Iron|
|Shaft sleeve||Stainless Sleeve / Engineering Plastic|
|Bore size min.||4”(100mm) and above|
|Power Range||0.5 to 7.5 HP|
220V- 240V, AC Single phase , 50Hz
340V- 440V, AC Three phase , 50Hz
|Motor Type||Water filled water cooled Induction motor|
|Coupling||Key / NEMA|
|Head||Maximum 455 M|
|Discharge||Maximum 30,000 LPH|
|Liquid temperature||Maximum 35ºC|
|Sand content in water||Maximum 50 PPM|